← All filaments · MatterHackers · PLA
MatterHackers Build Series PLA
Most affordable name-brand PLA — perfect for classrooms and high-volume hobby printing
Material
PLA
Spool weight
1000 g
MSRP
$19
Print temp
205–225 °C
Bed temp
50–60 °C
Glass transition
60 °C
Drying
Not required (still recommended in humid climates)
Tensile strength
50 MPa
Elongation at break
5%
Not food-safe
UV sensitive
Outdoor rating: 1/5
Where it shines
Most affordable name-brand PLA — perfect for classrooms and high-volume hobby printing.
Common use cases: prototyping, education, high-volume.
Where it falls short
Looser tolerances than premium brands; colors can vary by batch.
Print profile starting point
- Nozzle temp: start at 215°C and tune ±5°C for surface finish.
- Bed temp: 50°C is usually enough for adhesion; go up toward 60°C if first layer struggles.
Community sentiment
Reviewer rollup coming soon — we're aggregating community-source sentiment from Reddit r/3Dprinting, Printables, and YouTube reviewers. How we'll source it →
Where to buy
We link directly to the manufacturer where possible. Some retailer links may be affiliate links; we only ever link to products we'd recommend regardless.