← All filaments · Overture · PETG
Overture Overture PETG
Budget PETG with good clarity for translucent prints
Material
PETG
Spool weight
1000 g
MSRP
$24
Print temp
230–250 °C
Bed temp
70–90 °C
Glass transition
80 °C
Drying
65 °C / 4 h
Tensile strength
52 MPa
Elongation at break
50%
Food-safe (cool foods)
UV resistant
Outdoor rating: 4/5
Where it shines
Budget PETG with good clarity for translucent prints.
Common use cases: outdoor, structural, transparent.
Where it falls short
Inconsistent batch-to-batch — buy a few rolls before committing to a project.
Print profile starting point
- Nozzle temp: start at 240°C and tune ±5°C for surface finish.
- Bed temp: 70°C is usually enough for adhesion; go up toward 90°C if first layer struggles.
- Drying: 65°C for 4 hours before printing if the spool has been opened more than a few days.
Community sentiment
Reviewer rollup coming soon — we're aggregating community-source sentiment from Reddit r/3Dprinting, Printables, and YouTube reviewers. How we'll source it →
Where to buy
We link directly to the manufacturer where possible. Some retailer links may be affiliate links; we only ever link to products we'd recommend regardless.