← All filaments · Polymaker · Nylon-CF
Polymaker PolyMide PA6-CF
Carbon-fiber-reinforced nylon — stiff, strong, dimensionally stable. Engineering-tier
Material
Nylon-CF
Spool weight
500 g
MSRP
$70
Print temp
280–300 °C
Bed temp
60–90 °C
Glass transition
70 °C
Drying
95 °C / 12 h
Tensile strength
105 MPa
Elongation at break
3%
Not food-safe
UV sensitive
Outdoor rating: 3/5
Where it shines
Carbon-fiber-reinforced nylon — stiff, strong, dimensionally stable. Engineering-tier.
Common use cases: engineering, structural, high-temp, automotive, drone-frames.
Where it falls short
Hardened nozzle required (CF abrasive); needs hot enclosure; aggressive moisture absorption.
Print profile starting point
- Nozzle temp: start at 290°C and tune ±5°C for surface finish.
- Bed temp: 60°C is usually enough for adhesion; go up toward 90°C if first layer struggles.
- Drying: 95°C for 12 hours before printing if the spool has been opened more than a few days.
- Enclosure: required to prevent warping and layer cracking.
Community sentiment
Reviewer rollup coming soon — we're aggregating community-source sentiment from Reddit r/3Dprinting, Printables, and YouTube reviewers. How we'll source it →
Where to buy
We link directly to the manufacturer where possible. Some retailer links may be affiliate links; we only ever link to products we'd recommend regardless.